Dashboard Columns

Select the check box next to an item to display it as a column on the Dashboard.

Nursing Unit Name

Displays the name of the selected unit.

Room Number

Displays the room number and bed designator. If there is more than one bed in the room, the bed designator is displayed.

Bed Service Required icon ()

Displays Bed Service Required icon in the Room Number column when a bed associated with that room is in need of service.

CFCM ()

Displays the Contact Free Continuous Monitoring Non-Vitals Alert icon when a non-vitals alert is sent from a bed within that room. Non-vitals alerts can include, but are not limited to, an unstable bed signal, vitals no motion, a unit malfunction, a bed sensor problem, or an expired sensor. CFCM is selected and disabled when the "Bed HR/RR On" is selected; re-enabling and remaining selected with "Bed HR/RR On" is deselected.

Patient Name

Displays the patient name. You can change the format of the patient name display in Settings.

Incontinence ()

Displays the Incontinence icon when incontinence is detected for the corresponding patient.

Risks Icons

Displays the applicable safety risk icons for a patient. There are three risk icons.

• Falls:
• Pulmonary:
• Skin:

Bed Rails/Bed Exit/Bed Low/Brake On/HOB (Head of Bed Angle)

These columns display icons that indicate bed status information for compatible, connected Hillrom beds. A green check mark indicates optimal condition, a yellow X indicates a warning, a yellow triangle indicates a patient safety alert, and a red-filled triangle indicates a bed exit alarm. Click anywhere in the row to view the patient details window for more information about the bed state for a patient.

Here is how these columns appear when they are displayed on the Dashboard:

Bed HR/RR On

Indicates when a caregiver has enabled CFCM monitoring. The following warning message displays when "Bed HR/RR On" is selected: Warning: When displaying Bed HR/RR On, CFCM service icon will be required to be displayed.

Note: CFCM is selected and disabled when the "Bed HR/RR On" is selected; re-enabling and remaining selected with "Bed HR/RR On" is deselected.

Dashboard Dynamic Columns